Case study 2 – Bill Maltby

Was told by other garage manufacturers “this cannot be done!”

Bill Maltby – Colchester, Essex


  • Date Ordered: 16th July 2009
  • Date Installed: 11th August 2009
Bill with his finished garage

Bill with his finished garage

Bill emailed us on the 8th of July 2009 with a request for a building that he’d previously been told by other manufacturers could not or would not be possible!

He wanted to erect a sectional building, but using his existing front brick wall as the front face of the building.

We requested a plan of his idea, and on the 10th of July, Bill emailed it to us. We could clearly see why other concrete garage manufacturers had dismissed his idea, but we decided to look into this thoroughly and see if it was possible to do.

Our technical team decided that the only way for sure to check the buildings’ feasibility, was to visit the site, take some critical measurements and plan the construction of the building carefully.

We concluded that the construction of the building was certainly possible, but would need a timber filler-strip on the top of the wall after construction, which Bill happily offered to complete himself and eventually stain to match the rest of the timber work.

When it came to price, there were no excess charges placed on manufacturing the building, just a willingness to try and offer a solution to Bill’s requirements which we would like to think we offer to all of our clients.

In Bill’s Own words…

“Nucrete were the only supplier that were prepared to supply AND erect a garage with the very particular specifications I required.”

And when asked for a comment on the overall service he received from Nucrete, he said:

“I can’t praise the service enough. Please don’t change a thing.”

Nucrete would like to thank Bill for his kind words and wish him well for the future, with many good years of service from his sectional building.

Here are a couple of pictures that Bill supplied to us in the early stages before his garage installation

Bill's Sketch of proposed building

Bill's Sketch of proposed building

View from inside before installation

View from inside before installation

View from the road before installation

View from the road before installation


Contact Us

Please feel free to contact us with your requirements, and we will be more than happy to help you too! There is no obligation and we will always do our best to answer your questions and queries about sectional building manufacture, or see our product range here.

© 2010 Nucrete Online - All rights reserved. Terms and Conditions | Privacy Policy | MayersDesign | valid xhtml | industry articles feed | Share with Facebook

Registered in England and Wales No. 03115316 - VAT Reg. No. 640756743